Influence of acidification and re-neutralization on mineral equilibria and physicochemical properties of model cheese feed.

Cheese feed is used as spray-dryer feed in cheese powder production, where there is growing consumer demand to eliminate calcium-chelating salts (ES). To develop ES-free feed production processes, it is essential to investigate the relationship between pH, structural changes, and mineral solubilization. This study investigated the influence of acidification and pH re-neutralization on calcium equilibria and stability of ES-free model cheese feeds. The goal was to increase protein availability by solubilizing colloidal calcium phosphate (CCP) and to assess whether CCP solubilization is reversible upon re-neutralization. The extent of acidification (to pH 4.2 or pH 4.7) significantly affected the irreversibility of calcium solubilization upon re-neutralization. Moreover, re-neutralization treatment seemed to induce changes in protein-fat interactions. Feed viscosity was mainly influenced by the final pH, rather than the re-neutralization history. These results offer new insights into the complex interplay of pH, structural modifications, mineral solubilization, and stability in cheese feed production.

Fabrication and characterization of pectin-zein nanoparticles containing tanshinone using anti-solvent precipitation method.

Tanshinone compounds are secondary metabolites which their application in food and pharmaceutical industry is limited due to the low solubility in water and sensitivity to heat. This study aimed to develop a novel biopolymer nanocarriers system based on pectin/zein for the encapsulation of tanshinone compounds using the anti-solvent precipitation method. The concentration of pectin and mass ratio of tanshinone/zein in the final formulation of nanoparticles were optimized. According to the results, a pectin concentration of 1 g/L and a tanshinone/zein ratio of 0.1:1 g/g were considered the optimal nanoparticle formulation. The resulting nanoparticles exhibited a spherical core-shell structure, with approximate values for size, zeta potential, TSI, and encapsulation efficiency of 132 ± 0.002 nm, -38.6 ± 0.019 mV, 0.600 ± 0.084, and 79.41 ± 0.62 %, respectively. The FTIR test confirmed the presence of hydrophobic, hydrogen, and electrostatic interactions among the constituents within the nanoparticles. Additionally, XRD and DSC tests verified the amorphous nature of the nanoparticles. Morphological examination conducted through TEM, and SEM revealed the characteristics of the resulting nanoparticles. Furthermore, this carrier system significantly enhanced the solubility of tanshinone compounds in water.

Effect of Moderate Electric Fields on the Physical and Chemical Characteristics of Cheese Emulsions.

Cheese powder is a multifunctional ingredient that is produced by spray drying a hot cheese emulsion called cheese feed. Feed stability is achieved by manipulating calcium equilibrium using emulsifying salts. However, the increased demand for 'green' products created a need for alternative production methods. Therefore, this study investigated the impact of ohmic heating (OH) on Cheddar cheese, mineral balance, and the resulting cheese feed characteristics compared with a conventional method. A full factorial design was implemented to determine the optimal OH parameters for calcium solubilization. Electric field exposure and temperature had a positive correlation with mineral solubilization, where temperature had the greatest impact. Structural differences in pre-treated cheeses (TC) were analyzed using thermorheological and microscopic techniques. Obtained feeds were analyzed for particle size, stability, and viscosity. OH-treatment caused a weaker cheese structure, indicating the potential removal of calcium phosphate complexes. Lower component retention of OH_TC was attributed to the electroporation effect of OH treatment. Microscopic images revealed structural changes, with OH_TC displaying a more porous structure. Depending on the pre-treatment method, component recovery, viscosity, particle size distribution, and colloidal stability of the obtained feeds showed differences. Our findings show the potential of OH in mineral solubilization; however, further improvements are needed for industrial application.

Retracted: Preparation and optimization of soy (Katul cultivar) protein isolate cold-set gels induced by CaCl2 and transglutaminase.

Preparation and optimization of soy (Katul cultivar) protein isolate cold-set gels induced by CaCl2 and transglutaminase. Food Science & Nutrition, https://doi.org/10.1002/fsn3.3158. The above article, published online on December 8, 2022 in Wiley Online Library (https://wileyonlinelibrary.com), has been retracted by agreement between the journal Editor in Chief Y. Martin Lo, and Wiley Periodicals LLC. The retraction has been agreed upon due to an error in which the incorrect version of the article was published.

Edible insect as an alternative protein source: a review on the chemistry and functionalities of proteins under different processing methods.

The consumption of edible insects can be anadvantageous alternative to the conventional food supply chain, which involves global water waste, land deficit, undernutrition, and starvation. Besides the nutritional aspects, insect proteins have demonstrated a wide range of functional properties such as foamability, emulsifying and gelling abilities. The protein content and amino acid profile of some insects have revealed a good nutritional value and interesting functional properties. However, it is crucial to comprehend how the protein quality is affected by insect feeding, drying, and defatting. There is a knowledge gap about the impact of industrial treatment, such as pH, ionic strength, and heat treatment, on insect proteins' functional properties. In this review, we have aimed to highlight the potential application of insect proteins as a nutritional source and their promising technological applications. The study reported the principal insect protein characterization methodologies that have been investigated in the literature aiming to correlate the physicochemical parameters to possible protein functionalities. The research on the functional properties of insect proteins is at the exploratory level. Further detailed studies are needed to clarify the structure-function relation of insect proteins and how these functionalities and insect processing can increase consumer acceptance.

Gelatin from Saithe (Pollachius virens) Skin: Biochemical Characterization and Oxidative Stability in O/W Emulsions.

This study performed the extraction of gelatin from saithe (Pollachius virens) skin and compared it to commercial marine gelatin. As a first stage, we investigated the physicochemical and biochemical properties of the gelatin. SDS-PAGE analysis revealed the presence of α-chains, ß-chains, and other high-molecular-weight aggregates. DSC thermograms showed typical gelatin behavior, while the FTIR spectra were mainly situated in the amide band region (amide A, amide B, amide I, amide II, and amide III). In the second stage, we produced O/W emulsions and analyzed their physical and oxidative stability over 9 days. Oil droplets stabilized with the gelatins obtained from saithe fish skin had a size of ~500 nm and a ζ-potential ~+25 mV, which is comparable to oil droplets stabilized with commercial gelatin products. Moreover, the oxidative stability of the emulsions stabilized with gelatin from saithe fish skin showed promising results in terms of preventing the formation of some volatile compounds towards the end of the storage period compared to when using the commercial gelatins. This study indicates the potential application of fish skin gelatin in the fields of food and cosmetics, as well as suggesting that further investigations of their techno-functional properties.

High Methoxyl Pectin and Sodium Caseinate Film Matrix Reinforced with Green Carbon Quantum Dots: Rheological and Mechanical Studies.

Nowadays, proteins and polysaccharides play a fundamental role in the manufacturing of biocompatible materials applied in food packaging. The resulting films have, however, limits associated with the resistance to mechanical stress; therefore, it is important to reinforce the initial mixture with additives that promote the development of stronger molecular links. Carbon dots (CDs) are excellent candidates for this purpose due to the presence of surface functional groups that determine the formation of numerous intramolecular bonds between the charged biopolymers. The present research aims to evaluate the effect of CDs on the mechanical properties of biopolymer films obtained from sodium caseinate (CAS), high methoxyl pectin (HMP) and glycerol used as plasticizers. Green carbon dots (gCDs) were obtained from natural organic sources by green synthesis. The effects of gCDs on the flow behavior and viscoelastic properties of mixed biopolymer dispersions and the thermophysical properties of the corresponded films were evaluated by steady and unsteady shear rheological measurements and differential scanning calorimetry (DSC) tests, respectively. The dynamic mechanical measurements were realized taking into account the parameters of temperature and relative humidity. The results indicate a significant change in the viscosity of the protein-polysaccharide dispersions and the thermomechanical properties of the corresponding film samples reinforced with higher amounts of gCDs.

Gelling properties of black soldier fly (Hermetia illucens) larvae protein after ultrasound treatment.

H. illucens, black soldier fly larvae (BSFL) is one of the sustainable sources of protein. However, the research on the functionality of BSFL proteins is limited and need to be explored to increase consumer acceptance. The aim of this study is to create a gel system from BSFL protein and evaluate the impact of ultrasound treatment at different exposure time (5, 15, 30 min) on the physicochemical properties of BSFL protein. The highest values for surface hydrophobicity, size, ζ-potential were obtained after 15 min of ultrasound treatment and the same was found for the elastic modulus. Finally, confocal laser scanning microscopy (CLSM) along with image analysis revealed the lowest pore size after 15 min of treatment. The high protein content of BSFL protein extract and its promising gel system herein created, are important features to be considered for further development of insect-based food.

Formation and mitigation of acrylamide in oven baked vegetable fries.

Investigation into oven baked sweet potato and carrot fries at various temperatures and times demonstrated the in situ formation of acrylamide in an exponential manner. High levels of acrylamide were found in these food items: up to 327 µg/kg for sweet potato baked at 190 °C for 14 min, and 99 µg/kg for carrot baked at 190 °C for 13 min. Risk assessment via Margin of Exposures estimation showed that consumption of these fries might pose adverse health effects to consumers from toddlers to adults, especially when the fries were prepared at high temperatures above 175 °C and for a long time. Raw ingredient blanching and immersion in acetic acid prior to preparation have been proven to greatly reduce acrylamide formation, up to 99%. It is recommendable to apply these techniques either at industrial or domestic cooking scales to ensure minimal health risk from dietary exposure to acrylamide.

Interaction between Fish Skin Gelatin and Pea Protein at Air-Water Interface after Ultrasound Treatment.

The interaction between fish skin gelatin (FG) and pea protein isolate (PPI) was investigated at the air-water interface (A-W) before and after a high intensity (275 W, 5 min) ultrasound treatment (US). We analyzed the properties of the single protein suspensions as well as an equal ratio of FG:PPI (MIX), in terms of ζ-potential, particle size, molecular weight, bulk viscosity and interfacial tension. The foaming properties were then evaluated by visual analysis and by Turbiscan Tower. Confocal laser scanning microscopy (CLSM) was employed to explore the role of the proteins on the microstructure of foams. The results showed that the ultrasound treatment slightly influenced physicochemical properties of the proteins, while in general, did not significantly affect their behavior both in bulk and at the air-water interface. In particular, PPI aggregate size was reduced (-48 nm) while their negative charges were increased (-1 mV) after the treatment. However, when the proteins were combined, higher molecular weight of aggregates, higher foam stability values (+14%) and lower interfacial tension (IFT) values (47.2 ± 0.2 mN/m) were obtained, leading us to assume that a weak interaction was developed between them.

Influence of non-thermal microwaveradiationon emulsifying properties of sunflower protein.

Sunflower protein isolate obtained from industrially de-oiled press cake was treated with non-thermal microwave, aiming to investigate how structure and emulsifying properties were affected. Our results indicated that the content of polar amino acids was decreased and solubility and surface hydrophobicity were altered upon exposure to non-thermal microwave. Higher solubility and surface hydrophobicity of the samples treated with defrost mode and also 350 W were accompanied by a smaller size and lower uniformity of the oil droplets compared to the control and other samples. Non-thermal microwave treatment improved the emulsion stability by 1.43 times and defrost mode treated sample had the lowest stability index after 120 min. Interfacial dilatational rheology measurements revealed that 70 and 350 W treated samples created higher elastic, less stretchable solid-like layer at the O/W interface in comparison with defrost mode treated and control samples. Consequently, non-thermal microwave treatment could be considered as a promising simple, fast, and "green" protein modification technique.

A review on protein extracts from sunflower cake: techno-functional properties and promising modification methods.

De-oiled sunflower cake is a sustainable and promising protein source with high phenolic and fiber contents. The cake, which is an industrial by-product has been the subject of many studies investigating various aspects such as protein extraction, functional properties, interaction with other ingredients, and its performance in a wide range of food products. Innovative and conventional techniques of protein extraction from sunflower cake have been investigated to increase extraction yield and improve desired functional characteristics. Modulation of structure of plant-based proteins helps to control their techno-functional properties and widen their applications. Structure modification of proteins by physical methods including ultrasound treatment and gamma irradiation as well as enzymatic and chemical methods has been used to improve the functional properties of sunflower protein. This review collects and critically discusses the available information on techno-functional properties of protein extracts from sunflower cake and how its techno-functional properties can be tailored using various structure modification methods.

Physical and Oxidative Stability of Low-Fat Fish Oil-in-Water Emulsions Stabilized with Black Soldier Fly (Hermetia illucens) Larvae Protein Concentrate.

The physical and oxidative stability of fish oil-in-water (O/W) emulsions were investigated using black soldier fly larvae (BSFL) (Hermetia illucens) protein concentrate as an emulsifier. To improve the protein extraction and the techno-functionality, defatted BSFL powder was treated with ohmic heating (BSFL-OH) and a combination of ohmic heating and ultrasound (BSFL-UOH). Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) were performed in order to characterize the secondary structure and thermal stability of all protein concentrate samples. The interfacial properties were evaluated by the pendant drop technique. The lowest interfacial tension (12.95 mN/m) after 30 min was observed for BSFL-OH. Dynamic light scattering, ζ-potential and turbiscan stability index (TSI) were used to evaluate the physical stability of emulsions. BSFL-OH showed the smallest droplet size (0.68 µm) and the best emulsion stability (TSI = 8.89). The formation of primary and secondary volatile oxidation products and consumption of tocopherols were evaluated for all emulsions, revealing that OH and ultrasound treatment did not improve oxidative stability compared to the emulsion with untreated BSFL. The results revealed the promising application of BSFL proteins as emulsifiers and the ability of ohmic heating to improve the emulsifying properties of BSFL proteins.

Chufa Drink: Potential in Developing a New Plant-Based Fermented Dessert.

Plant-based foods with desirable texture and nutritional value have attracted considerable interest from consumers. In order to meet the growing demand for more sustainable and health-focused products, new sources for plant-based products are needed. In this study, we aimed to develop an innovative plant-based dessert based on the underutilized crop chufa tubers (Cyperus esculentus). The chufa extract was fermented with plant-adapted lactic acid bacteria and formulated with the purpose of imitating the Danish summer dessert "cold butter-milk soup". The effect of various bacterial fermentations and formulations on steady and oscillatory rheology, stability, dry matter, pH, and sugar profile of the product were studied and compared to a commercial cold buttermilk soup sample. A strain of Leuconostoc mesenteroides was found to create the most similar taste to a commercial sample. By adding lemon juice, sucrose, xanthan gum, and vanilla to the fermented chufa drink, the drink was found to mimic the pH, texture, acid profile, and stability of a commercial dairy-based sample, while containing a lower concentration of carbohydrates.

Physico-chemical and colloidal properties of protein extracted from black soldier fly (Hermetia illucens) larvae.

The black soldier fly larvae (BSFL), Hermetia illucens (Linnaeus), has been largely utilized for animal feed. Due to its interesting composition, BSFL has great potential to be further implemented in the human diet. Herein we compared the flour and protein extract composition based on their moisture, ash, amino acids, mineral, and protein content. To have wide knowledge on protein profile and behavior, SDS-page electrophoresis, Fourier-transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) were used to give information about protein structure and thermal stability, respectively. The flour and protein extract contained respectively 37.3% and 61.1% of protein. DSC graph reported a glass transition temperature around 30 °C, recognizable by a shift in the curve, and an endothermic peak for solid melting at around 200 °C. FTIR analysis showed the main amide bands (A, B, I, II, III) for the flour and protein extract. The foam properties of BSFL protein extract were explored under different temperatures treatment, and the best foam stability was reached at 85 °C with 15 min of treatment. The data highlight the promising techno-functional properties of BSFL protein extract, and that the nutritional composition might be suitable for further use of BSFL as food fortification system.

Development of a yoghurt alternative, based on plant-adapted lactic acid bacteria, soy drink and the liquid fraction of brewers' spent grain.

With consumers becoming more aware of sustainability, healthier lifestyles and animal welfare, plant-based food products as alternatives to dairy products have become a fast-growing industry in the last decade, and an increasing number of plant-based products are showing up on the markets. With over 88 million tons of food wasted in Europe annually, a sustainable alternative to dairy could be to use side streams for new products. Here, we tried to develop a plant-based yogurt alternative based on three ingredients: commercial soy drink and a liquid fraction of brewers' spent grain fermented with plant-adapted lactic acid bacteria. Analysis of the content and properties of the fermented product were compared to a commercial plant-based yoghurt-like product and a commercial dairy yoghurt. Results from the project show that fermentation of a commercial soy drink containing 20% of the liquid fraction of brewers' spent grain results in a product with texture and sensory characteristics that mimics a dairy yogurt.

Argon and nitrogen cold plasma effects on wheat germ lipolytic enzymes: Comparison to thermal treatment.

The effects of argon and nitrogen cold plasma treatments on the lipolytic enzymes activity in wheat germ were investigated. Using argon as plasma gas, the residual activity of lipase and lipoxygenase decreased to 42.50% and 87.72%, respectively after 30 min. Switching plasma input gas to nitrogen, the residual activities of lipase and lipoxygenase after the same time of atmospheric cold plasma (ACP) treatment were 77.50% and 92.52%, respectively. The antioxidant potential and phenolic compounds show no significant difference during ACP duration. However, the remaining activities of lipase and lipoxygenase after 30 min steam autoclaving were 6.25% and 18.60%, respectively. Also, the antioxidant activity and total phenolic content reduced by 14.70% and 30.80%, respectively. In brief, the ACP treatment efficiency was function of the input gas and the treatment time. The presented results about the input gas impacts would be useful in industrial development of ACP application for wheat germ stabilization.

Physical Stability of Oil-In-Water Emulsion Stabilized by Gelatin from Saithe (Pollachius virens) Skin.

The objective of the present study was to investigate the physical stability of an oil-in-water (O/W) emulsion stabilized with gelatin from saithe (Pollachius virens) skin obtained with three different extraction protocols compared to two commercial fish skin gelatins. We first investigated the gelatin powder composition, and then produced the O/W emulsions at pH 3 by mechanical dispersion followed by an ultrasonication process. Sodium dodecyl sulfate (SDS) profiles for commercial samples indicated that extensive and unspecific hydrolysis of collagen occurred during the production process, whereas gelatin extracted from saithe fish skin showed typical electrophoresis patterns of type I collagen, with the presence of γ- and ß-chains. Emulsions obtained with commercial samples presented high physical stability over 7 days, with particle size of ~200 nm. However, emulsions obtained with saithe fish skin presented particle size between 300 and 450 nm. Slight differences were observed in viscosity, with values between ~1 and ~4 mPa·s. Interfacial tension measurements presented values between 13 and 17 mN·m-1 with three different regimes for all the systems.

Physicochemical and structural characterization of sodium caseinate based film-forming solutions and edible films as affected by high methoxyl pectin.

Present work focused on the role of high methoxyl pectin (HMP) in rheology and physical stability of sodium caseinate (CAS) film-forming solution as well as mechanical and structural characteristics of its edible film. CAS-HMP films were fabricated at different blend ratio. Incorporation of HMP into CAS solution decreased pH value of the solution, acting as a natural acidifier. Turbidity and particle size distribution measurements indicated that some level of protein-polysaccharide interactions developed in 50CAS:50HMP and 25CAS:75HMP. Analysis of steady-state shear viscosity of film solutions showed a transition from Newtonian to shear-thinning flow behaviour by addition of HMP. Dynamic viscoelasticity evaluations revealed that the elasticity of solutions decreased by increasing HMP ratio. Physical stability of solutions was assessed over time using a Turbiscanner. All solutions showed distinct mechanisms of destabilization. 50CAS:50HMP and 25CAS:75HMP samples appeared to be the most stable solutions. Increasing CAS:HMP ratio from 100:0 to 25:75 increased the water solubility and elongation at break of edible films from 27.16 to 63.70% and 2.36 to 16.53%, respectively. SEM analysis exhibited a homogenous microstructure in 50CAS:50HMP and 25CAS:75HMP. DSC thermograms displayed lower glass transition temperatures in HMP-incorporated films. Presence of the interactions among biopolymers in biocomposites was confirmed by FTIR spectra.

Physico-chemical, structural and techno-functional properties of gelatin from saithe (Pollachius virens) skin.

Gelatin from saithe (Pollachius virens) skin, with high mineral content, was characterized and compared to marine gelatin from the market. As expected, gelatin extracted from the saithe skin had a high mineral content (>20%), compared to commercial gelatin (<0.2%). SDS-PAGE analysis revealed the presence of α-chains, ß-chains and other high molecular weight aggregates. The absorption bands of gelatin in FTIR spectra were mainly situated in the amide band region (amide A, amide B, amide I, amide II and amide III), whereas DSC thermograms showed typical gelatin behavior. Interesting viscoelastic and higher foaming properties were observed for the saithe gelatins, compared to the market gelatins, probably due to the presence of high sea mineral content. The potential applications in food and cosmetic area of gelatin with high mineral content are presented and discussed in the conclusions.